info_i_25x25.png Due to unforeseen weather conditions we are experiencing higher chat wait times. Remember you can also submit a ticket and one of our support representatives will get back to you as soon as possible. We apologize for the inconvenience.

sunMAX - Drawing: Roof Plane Measurements


The purpose of the Roof Plane Measurements drawing is to help ensure that the installation is prepared properly and that the permit application will be approved. You can use a screenshot of the sunMAX system design as it appears in the sunMAX Design software and/or annotate previous drawings you may have already prepared in Drawing: PV Array.


In order to process the permit applications and finalize the design- we will need precise measurements concerning the roof/panel design. Be sure to provide accurate measurements of the following:

  • Roof width and length i.e. (45 x 15 ft)
  • Roof pitch (measures the rise of roof)  i.e. 3.5/12  (inches)
  • Distance of proposed solar panel from either edge of roof i.e. 3 FT