Readers will learn about Layer 2 (802.1p) and Layer 3 (DSCP) Quality of Service (QoS) support on the EdgeSwitch XP.
NOTES & REQUIREMENTS:
Applicable to the latest EdgeSwitch XP firmware on the following models:
In order for EdgeSwitch XP to classify and differentiate types of traffic when applying QoS rules, the traffic must have a special value set in the IP Header DSCP field. The originating software or hardware device is responsible for applying this value, and only if this field is set will traffic be prioritized.
By default, all traffic is classified as Best Effort, meaning there is no prioritization. The other categories can be defined with the following values:
|802.1p Class of Service||TOS Range||DSCP Range||WME Category|
|0 - Best Effort||0x00-0x1f||0-7||Best Effort|
|1 - Background||0x20-0x3f||8-15||Background|
|2 - Spare||0x40-0x5f||16-23||Background|
|3 - Excellent Effort||0x60-0x7f||24-25
|4 - Controlled Load||0x80-0x9f||32-39||Video|
|5 - Video (<100ms latency)||0xa0-0xbf||40-45||Video|
|6 - Voice (<10ms latency)||0x68
|7 - Network Control||0xe0-0xff||56-63||Voice|