Readers will learn how to enable the Link Layer Discovery Protocol (LLDP) on EdgeRouter interfaces.
NOTES & REQUIREMENTS:
Applicable to the latest EdgeOS firmware on all EdgeRouter models. Please see the Related Articles below for more information.
Device used in this article:
CLI: Access the command line interface (CLI). You can do this using the CLI button in the GUI or by using a program such as PuTTY.
1. Enter configuration mode.
2. Enable LLDP on the desired interfaces.
set service lldp interface eth1
set service lldp interface eth2
set service lldp interface ...
NOTE: You can also use the
3. Commit the changes and save the configuration.
commit ; save