Readers will learn how to enable Passive PoE output on the interfaces of an ES-XP.
NOTES & REQUIREMENTS:
Applicable to the latest EdgeSwitch-XP firmware on the following models:
Device used in this article:
How to enable the PoE Output
GUI: Access the ES-XP Web UI.
1. Navigate to the Ports tab.
2. Select the port that needs to be configured for PoE output.
3. Choose between the following PoE settings (depending on the ES-XP model):
OffNo PoE output
24VPassive PoE output using 24V
48VPassive PoE output using 48V
WARNING: Make sure that a compatible PoE device is plugged into the port before enabling the Passive PoE output.
4. Apply the changes by clicking on the Save Changes button.