Overview

Readers will learn how to enable Jumbo Frame support on the EdgeSwitch-XP.

NOTES & REQUIREMENTS: Applicable to the latest EdgeSwitch-XP firmware on the following models: ES-5XP ES-8XP ES-16XP  Device used in this article: ES-8XP

Maximum MTU Support

Back to Top

The maximum MTU size that the EdgeSwitch-XP supports is dependent on the ES-XP model. The EdgeSwitch-XP devices support jumbo frames with the following MTU sizes:

• ES-5XPMaximum MTU size of 9216 bytes.
• ES-8XPMaximum MTU size of 9720 bytes.
• ES-16XPMaximum MTU size of 9720 bytes.

The support for jumbo frames is disabled by default, but can be enabled by following the steps below:

GUI: Access the Graphical User Interface (GUI).

1. Navigate to the Device tab.

2. Check the Jumbo Frames checkbox.

3. Apply the changes by clicking on the Save Changes button.