EdgeSwitch - How do I enable HTTPS / SSH management access modes on EdgeSwitch?

Answer


  1. Navigate to System >> Management Access. From the dropdown menu, choose either HTTPS or SSH to configure.



  2. For both HTTPS & SSH, you will need to Generate Certificates (HTTPS) / Keys (SSH) to identify trusted hosts before you can select Enable next to Admin Mode. Click the Gear (wheel) icon. Wait as "Generation in Progress" occurs until "Present" appears.



    Note: For SSH, create both RSA & DSA Keys.

  3. Select Enable, then click Submit.



  4. After Certificates / Keys are "Present" and the Admin Mode is Enabled, click Save Configuration at the top-right corner of the screen to save the Running Configuration to the Boot Configuration.



    Wherever prompted, click Save to confirm device configuration is saved.

     

Related Articles


UBNT-Jamie

Powered by Zendesk