This article describes the three methods to properly shut down the UniFi NVR.
Table of Contents
The NVR appliance is a Linux server and must be shutdown properly to avoid corrupting its internal database. If the device loses power abruptly, and the database becomes corrupted, the fix is resetting the device to factory defaults. The three ways to properly shut down the NVR appliance are explained in the following section.
Options to Shut Down an NVR
Power off via the power button
- Press the blue power button on the NVR appliance.
Power off via the UI
- Access the NVR management console (UI).
- Using the NVR's IP address, navigate to URL http://<NVR_appliance_IP>:80
- If you do not know the IP address, you can find it using the Ubiquiti Discovery Tool.
Power off and reboot via SSH
You can also SSH into the device and issue the