This article provides a list of Ubiquiti and third party SFP and SFP+ modules that are compatible with EdgeRouters.
Ubiquiti SFP/SFP+ Modules and DAC Cables
UBNT branded SFP/SFP+ modules and DAC cables are officially supported and compatible with all EdgeSwitch, EdgeRouter, UniFi Switch and UniFi Security Gateway models which use SFP or SFP+ ports.
Fiber SFP modules (1.25 Gbps)
Fiber SFP+ modules (10 Gbps)
Copper SFP modules (1 Gbps and 10 Gbps)
DAC cables (10 Gbps)
- UDC-1 (1m)
- UDC-2 (2m)
- UDC-3 (3m)
Third-Party SFP/SFP+ Modules and DAC Cables
The list below includes third-party SFP/SFP+ transceivers that have been tested by community members and/or our testing team. Please note that these should work, but we cannot assure that they will. Some modules will have multiple hardware revisions, and while one revision may work (i.e. 1.0), it's possible that a newer revision (i.e. 1.1, 1.2, etc.) of the same module may not work. It is also possible that these modules will work with one model (such as the ER-8-XG) but not with another model. Please note that Ubiquiti only offers direct support for UBNT branded SFP/SFP+ modules and DAC cables.
NOTE: Not all third-party modules support DDM/DOM (Digital Diagnostic Monitoring/Digital Optical Monitoring) therefore data like Tx and Rx levels and other statistics will not be shown for those modules in the SFP Information tab.
SFP and SFP+ modules
AxiomGLC-T-AX Copper SFP
Chelsio / JDSUPLRXPL-SC-S43-42B
CiscoGLC-T Copper SFP
Nortel/AvayaLX DDI 10km AA1419049-E6
Direct Attached Copper (DAC)
Tested by community members to be not working:
CiscoFET-10G - 10-2566-01